Multi Wings Industrial Centrifugal Blower 800m3/H - 90000m3/h

Centrifugal fan blower industrial centrifugal blower radial blower fan speed of fan frp centrifugal fan frp material

Energy-saving methods of FRP fan:

Each user wants to give full play to the efficiency and function of the FRP fan. Only energy saving can improve the use effect of the fan without harming the fan. So how to effectively improve the efficiency and energy saving of the fan in operation?

1. The regulation of the fan as a whole will have a corresponding relationship between a certain pressure, pressure and air volume. By adjusting the radian and size of the air chamber, the number of blades and the opening design of the impeller will change the total pressure of the fan. To achieve a balance between pressure and air volume, blade and chamber materials need to be considered.

2. Invest some technical funds in the design of FRP fan. In order to fundamentally solve the quality problem of the fan and extend its service life, improving the overall technology of the fan is the fundamental solution to energy saving.

Therefore, to effectively improve the use efficiency of the FRP fan, we need to start from the above two aspects, but in addition, we also need to take good maintenance measures for the FRP fan to improve the use effect, reduce energy consumption, and do not damage the FRP fan.

Installation and maintenance of FRP fan

1. Improper mechanical installation, misplaced parts, and large preload

2, the shaft system is not good

3. Improper adjustment of machine geometric parameters (such as fitting gap, interference amount and relative position)

4. The pipeline stress is large, and the dynamic characteristics and installation accuracy of the machine are changed under the working state

5. Improper long-term placement of the rotor has changed the dynamic balance accuracy, which has not been repaired according to the rules, and has destroyed the original matching nature and accuracy of the machine

The specialized manufacturers of FRP fans are small, which is because the demand for FRP fans in the country is very small. Why is the quantity demanded so small? Because the cost of FRP fan is higher than that of steel fan, the ordinary ventilation environment will not choose FRP fan, and the place with acid and alkali gas is limited relative to the place with ordinary environment, so the demand for FRP fan is less than that of steel fan.

 

 

 
Key Features 

• Impeller diameter: 90~3500 mm 
• Speed of mainshaft: 560~2900 rpm
• Pressure range: 3000~25425 Pa
• Flow range: 1297~83305 m3/h
• Air Temperature: 20~1000 Celsius degree

• Material: Cast Iron, Carbon Steel, Stainless Steel.

• Efficiency: 80%-90%

Please advise us the USAGE and following Parameter.Our engineering Dept will recommend the most suitable product for you.